PEAK RADIATOR FLUSH

PEAK RADIATOR FLUSH is a non-acidic radiator flush containing organic salts. It safely removes scum, oily residue, sediments, rust, deposits, and other degradation products from the cooling system.

PEAK RADIATOR FLUSH will not harm metals, plastics, rubber seals, or gaskets in engine cooling systems of petrol, diesel, gas-fuelled vehicles, trucks, buses, tractors, and heavy machinery.

BENEFITS

• Contains corrosion inhibitors
• Easy to use
• Maximises cooling system efficiency
• Quickly and safely removes scum, oily residue, sediments, rust, deposits, and other
  degradation products from the cooling system
• Requires no neutralizers
• Safe for all cooling systems including aluminium radiators

HOW TO USE:

• Ensure the engine cooling system is cold prior to starting to prevent the risk of burns.
• Drain the cooling system completely, then fill the system with water and PEAK Radiator Flush at a dose rate of Between 2.5 – 5% in water (between 250ml
  and 500ml per 10 Litres of cooling system capacity).
• Start the engine while idling making sure that the heater is turned on and run for 20 minutes.
• Allow the system to cool, drain and flush thoroughly with water.
• Refill the system with fresh water and inspect for leaks, tighten loose hose clamps and bolts were necessary.
• Drain and then refill the cooling system with the recommended PEAK coolant