PEAK LOG END SEALER
OIL BASED EMULSION

     

PRODUCT DESCRIPTION

PEAK LOG END SEALER is a white fluid emulsion manufactured using a combination of unique additives and fatty acids specifically designed to prevent “end checks” in cut or sawn timber. The product works by minimising the loss of moisture from the ends of sawn timber to within acceptable limits, thus preventing excessive “end checking” of timber, particularly during the stacking period at sawmills.

PEAK LOG END SEALER is applied at a rate of 1 litre to 4m² of area approximately - comparable to a heavy coat of paint. It is easily applied by brushing, dipping, or spraying with conventional equipment.

NOTE: Product must be stirred before use

SHELF LIFE: 12 months from the date of manufacturing

BENEFITS

• Increased sound timber yield from each log achieved at a cost effective rate
• Environmentally sensible - no harsh chemicals
• Stable in extended storage over a wide range of temperatures, particularly at low ambient temperatures unlike wax based products
• Reduced fire hazard, due to the absence of highly volatile flammable solvents
• Ready clean-up of equipment with Mineral Turpentine or Low Odour Kerosene

 

CHARACTERISTICS

Test	Typical Value
Density 15°C g/cm³	0.97
Viscosity @ 40°C cSt	<10
Flash Point °C	>250
Appearance	White emulsion

PRODUCT SIZE

Part Number	Size	Carton Qty	Pallet Qty
PKILES020	20 Litre		32
PKILES205	205 Litre		4