PEAK SYNTHETIC BIO MOULD OIL
BIODEGRADABLE MOULD RELEASING OIL
PRODUCT DESCRIPTION
PEAK SYNTHETIC BIO MOULD OIL is a premium, biodegradable mould release oil formulated from pale coloured, high quality synthetic ester base oils and naturally occurring fatty compounds. Designed for the construction and precast concrete industries, it provides a clean, positive release while delivering superior surface finish and reduced formwork wear.
PEAK SYNTHETIC BIO MOULD OIL enhances surface activity between the mould and concrete, significantly reducing blowholes, surface blemishes, staining, and adhesion issues. Its low-viscosity, low-odour formulation supports safer application and cleaner work environments while extending mould life.
PEAK SYNTHETIC BIO MOULD OIL is supplied ready to use and is suitable for all common mould materials, including timber, steel, plastic, aluminium, fibreglass, and resin formwork.
BENEFITS
- Biodegradable, non-toxic and non-hazardous formulation
- Provides clean, positive release with minimal residue
- Reduces blowholes, surface blemishes and staining
- Protects moulds against rust, corrosion and moisture ingress
- Low odour and VOC-free for safer application
STORAGE & HANDLING
- Store indoors below 40°C in original, sealed containers
- Product can be stored for at least 1 year under recommended storage conditions
- Avoid prolonged exposure to air
- Do not allow water contamination
- Product may thicken or solidify if cooled below 0°C
DIRECTIONS:
- Stir or shake well before use for best performance
- Ensure mould surfaces are clean and free from contaminants before application
- Apply in a thin, even film at a rate of 10–20 mL/m² using a sprayer, brush, roller or swab
- For best economy and performance, a fine fog spray is recommended
- Avoid over-application, as excess product may reduce release performance and can be removed using a mop or soft cloth
- For new or unsealed timber formwork, apply a pre-treatment coat, then apply a second light coat before use
- Do NOT apply on rubber (e.g. rotor drive belts) or on styrofoam
CHARACTERISTICS
| Test | Typical Value |
|---|---|
| Density 15°C g/cm³ | 0.9023 |
| Viscosity @ 40°C cSt | 8 |
| Viscosity @ 100°C cSt | 2.6 |
| Viscosity Index | 170 |
| Flash Point °C | >170 |
| Appearance | Clear & Bright |
| Colour | Light Yellow |
| Biodegrability | 100% |
PRODUCT SIZE
| Part Number | Size | Carton Qty | Pallet Qty |
|---|---|---|---|
| PKFBMO1000 | 1000 Litre |
